BFTXY - UNGAR ANTI-SEIZE #8001
- MSDS: BFTXY
- Manufacturer: PACKAGING COMPONENTS CO OF ELDON INDUSTRIES
- Product Name: UNGAR ANTI-SEIZE #8001
- National Stock Number: 8030-00-889-5285
Product Identification
Product ID:UNGAR ANTI-SEIZE #8001
MSDS Date:01/01/1987
FSC:8030
NIIN:00-889-5285
MSDS Number: BFTXY
Responsible Party
Emergency Phone: 213-682-2784
Cage: KO094
Contractor
Telephone: 213-682-2784
Cage: KO094
Ingredients
PIGMENTS (MIXTURE)
VEHICLE (MIXTURE)
SOLVENTS (MIXTURE)
Fraction By Weight: <5%
ACGIH TLV: 400PPM
ADDITIVES (MIXTURE)
Fraction By Weight: <5%
ACGIH TLV: UNK
Hazards
Effects of Overexposure:SMOKE INHAL. SAME AS FOR ANY SMOKE FROM GRASS
OR OIL FIRES.
First Aid
First Aid:GROSS OVER-EXPOSURE TO SMOKE MAY REQUIRE THE REMOVAL OF
EXPOSED PERSONS TO FRESH AIR.
Fire Fighting
Flash Point:375-400F COC
Extinguishing Media:CO*2, DRY CHEMS,FOAM,WATER SPRAY.
Fire Fighting Procedures:DO NO ENTER ANY ENCLOSED/CONFINED SPACE (SU
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:WIPE UP W/PAPER TOWELS. PRODUCT WILL NOT
AUTO-IGNITE, BUT WILL BURN IF HEATED & IGNITED.
Handling
Handling and Storage Precautions:STORE AT ROOM TEMP, 32-140 DEGREES.
PRODUCT IS NORMALLY AVAILABLE ONLY IN SMALL ALUM TUBES, SO NO SPEC
PRECAUT ARE NEC.
Other Precautions:IN DRUM QUANTITIES, PRODUCT SHOULD NOT BE TRANSFERRED
BY USING A PUMP AT HIGH SPEED & PRESSURE.
Exposure Controls
Respiratory Protection:NONE-REQD
Ventilation:LOCAL EXHAUST
Protective Gloves:NOT NEEDED
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:600F 315C
Vapor Pres:100
Vapor Density:0
Spec Gravity:.95
Evaporation Rate & Reference:BUACETATE <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW WHITE-CREAMY GREAS-SLIGHT FLORAL ODOR
Percent Volatiles by Volume:<2
Stability
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:PRODUCT WILL BURN, BUT IS NOT HIGHLY
FLAMMABLE.
Hazardous Decomposition Products:NONE(ONLY NON-HAZARDOUS WHITE SMOKE)
Disposal
Waste Disposal Methods:SPILLED PRODUCT OR EMPTY CONTNRS MAY BE DISPOS
OF IN ANY NORMAL COLLECTION CONTAINER. MATERIAL IS GREASY & STICKY.
USE PAPER TOWELS W/PAINT THINNER TO CLEAN SURFACES. USE HOT SOAP &
WATER TO REMOV PRO DUCT FROM SKIN & HANDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.